Knowing the proper 2014 Honda Civic tire pressure is important for safe driving and preventing unnecessary wear on your tires. Improper tire pressure can reduce fuel economy, shorten the life of your tires, and even lead to a blowout.
This step-by-step guide will teach you how to check and adjust the tire pressure on a 2014 Honda Civic. We’ll cover:
- What is the recommended tire pressure is
- How to find the tire information placard
- Steps to check & adjust tire pressure
- What the tire pressure monitoring system light means
- When to check tire pressure
- FAQs on Honda Civic tire pressure
Plus plenty of tips to help keep your Civic’s tires in their best shape.
Let’s get started!
What is the Recommended 2014 Honda Civic Tire Pressure?
The factory-recommended tire pressure for the 2014 Honda Civic depends on the trim, options, and tire size that originally came with your Civic.
Most 2014 Honda Civics came equipped with 205/55R16 91V all-season tires from the factory. For these models, Honda recommends:
- 33 PSI cold front tire pressure
- 31 PSI cold rear tire pressure
However, the only way to know for sure is to check the tire information placard located on the driver’s side door jamb of your 2014 Civic.
This placard shows the automaker’s recommended cold tire pressure for your specific Honda Civic’s tires based on trim, options, GVWR, and more. We’ll go over how to find this next.
How to Find the 2014 Honda Civic Tire Information Placard
The tire information placard in your 2014 Civic lists the recommended cold tire inflation pressures that your vehicle’s tires should be set to.
Here are step-by-step instructions to find it:
Step 1: Open Your Driver’s Side Door
The tire information placard is located on the backside of the driver’s side door, also called the door jamb.
So first, open the driver’s side door of your 2014 Honda Civic.
Step 2: Check the Backside of the Door
Now check the backside of the door you just opened.
Tilt your head and peek around the opened door. You should see a sticker or metal placard attached to the door jamb.
This contains important info about your Civic including tire size, recommended pressures, seating capacity, and more.
Step 3: Note the Tire Pressure Values
Take a close look at the tire pressure values listed. You’ll see recommended tire pressures listed for different conditions:
- Cold front tire pressure
- Cold rear tire pressure
- Spare tire pressure (if equipped)
Make a note of the front and rear cold tire pressure recommendations.
You’ll need these PSI values for when you go to check and adjust the pressure at your tires.
Steps to Check & Adjust 2014 Honda Civic Tire Pressure
Once you’ve found your placard and know the factory-recommended pressures, it’s time to check and adjust tire pressures on your Civic.
Here is the 6-step process:
Step 1: Get an Accurate Tire Pressure Gauge
Having an accurate tire pressure gauge for the Honda Civic is critical here.
A cheap or worn-out gauge can be off by several PSI which is enough to throw your pressures way off.
We recommend a dial gauge or digital gauge that’s accurate to 0.5 PSI or better. Some top-rated options are:
- AstroAI Digital Tire Pressure Gauge
- JACO ElitePro Tire Pressure Gauge
- Milton S-921 Dial Tire Gauge
Also, make sure your gauge PSI range covers the recommended inflation pressures. Most Honda Civics call for 29-35 PSI, so a standard 0-60 PSI gauge will work.
Step 2: Check When Tires are Cold
For the most accurate reading, check pressures when your tires are cold.
“Cold” means the vehicle has been parked for 3+ hours without being driven or sitting in direct sunlight.
Why cold? As temperature increases from driving or sun exposure, so does tire pressure.
A hot tire can be up to 5 PSI higher than a cold reading. Checking cold ensures you get an accurate baseline pressure.
Step 3 Remove Tire Valve Caps
Start by removing the valve caps on your Civic’s tires one at a time.
This exposes the valve stem which is where you attach the pressure gauge.
Step 4: Firmly Press the Gauge onto the Valve Stem
With the valve cap removed, firmly press the gauge onto the end of the valve stem.
You need a good seal to get the air to flow into the gauge. The reading may fluctuate a bit before settling on the actual PSI.
Step 5: Note Pressure & Adjust if Needed
If the pressure is low, you’ll need to inflate up to the recommended PSI.
Use this chart as a guide on how much to inflate based on how much current pressure is low:
| Current Tire Pressure | Inflate by: |
|---|---|
| 1-2 PSI low | 1-2 PSI |
| 3-4 PSI low | 3 PSI |
| 5+ PSI low | 5 PSI |
Or inflate to the exact recommended PSI listed on the placard.
If pressure is high, pressing a metal pin in the valve stem will slowly release air.
Step 6: Replace Valve Stem Cap When Done
When finished, be sure to put the valve caps back on so dust and moisture don’t enter the valve.
And that’s it, you’ve checked and adjusted pressures on your civic back to the factory recommendation!
What Does the Tire Pressure Monitoring System Light Mean?
All 2014 Honda Civics also come with a tire pressure monitoring system (TPMS).
This system uses sensors mounted inside each wheel to monitor tire inflation pressure.
If one or more tires become 25 percent under-inflated, the TPMS will detect this and notify you via the instrument panel.
Specifically, the TPMS indicator light comes on and stays illuminated.
This signals you have at least one significantly under-inflated tire that needs attention as soon as possible.
The system won’t tell you which specific tire though, so you’ll need to use a tire gauge to check each one.
Note that the TPMS indicator comes on briefly when first starting your Honda as part of a self-check. If the light stays on while driving or comes on during a trip however, one or more tires are underinflated and need your attention.
If the light comes on, first pull over and check tire pressures with a gauge ASAP.
Inflate any under-inflated tire back up to the placard recommendation. This should also turn off the TPMS light after a few minutes once everything is within 3-4 PSI of the recommendation.
Driving on one or more seriously under-inflated tires can lead to uneven treadwear, reduced steering and braking control as well as blowouts. So take TPMS warnings seriously.
When to Check Honda Civic Tire Pressure
To keep your tires in their best shape and prevent rapid wear, check pressure at least once a month.
Checking pressure when cold gives the most accurate baseline reading as we covered earlier.
It’s also smart to recheck pressure anytime…
- You notice uneven or excess tire wear
- The tires seem softer than usual
- TPMS light comes on
- The car feels ‘squishy’ and less responsive handling
This ensures inflation stays where it needs to be for safety, performance, and longevity.
Many drivers also check PSI when seasons change. A typical pattern would be checking:
- April (before the summer heat arrives)
- October (before winter cold arrives)
- January (during winter’s deepest cold)
Temperature fluctuations between seasons cause expansion and contraction which alters pressure over time.
While monthly checks are best, this seasonal recheck pattern hits four times a year which catches any significant pressure drops.
Finally, check PSI before extended trips or carrying extra passengers or cargo:
- Added weight means tires need 5-10% higher pressures
- Helps reduce heat buildup & stress from long miles
Adjust to placard recommendations according to load conditions before embarking. This keeps additional stress off the tire structure.
Stay proactive on pressures, and your Civic’s tires will last longer with better grip and performance all around.
FAQs on Recommended Tire Pressure for the Honda Civic
Here are answers to some frequently asked questions about Honda Civic tire pressures from drivers:
Is tire pressure the same for all Honda Civics?
No, recommended pressure depends on the trim, options, tires and load weight capacity originally installed from the factory. Check placard on your specific Civic.
Where can I find the recommended PSI for my spare donut tire?
Full size spare will be listed on placard. For donut spares, check sidewall or owner’s manual.
Do I need a specific air pressure for snow tires on my Civic?
Yes the different tread and rubber compound require adjusting pressure +/- 5 PSI from your all-seasons. Check owner’s manuals for exact specification.
What PSI should I use when towing or fully loaded?
Inflate to the maximum pressure listed on your placard for heavy loads. This provides critical support and prevents damage when near gross vehicle weight.
How can I tell which Civic tire has low pressure with a TPMS light on?
TPMS only alerts when one tire is 25% under target PSI. You’ll need to check each tire with a quality pressure gauge to see which one(s) are low.
Where is the tire pressure sensor located?
Behind valve stem inside the wheel. They usually last 8-10 years before needing replacement. Cost is $50-100 per wheel.
My TPMS light is on but pressures are fine. Now what?
If TPMS indicator stays on after inflating tires properly, the system may need to be reset. Turn ignition off & on three times waiting two seconds between cycles to reset.
We hope this guide helps you keep the tire pressure dialed in on your 2014 Honda Civic for many more happy and safe miles ahead! Being proactive with pressures pays off all around.
